Abstract Powder resistivity and electrode resistivity are correlated but not perfectly linear across every processing stage. Using IEST PRCD3100 powder resistivity and compaction density tester (10–350 MPa) and…
1. Article Information Title: Rate-Dependent Failure Behavior Regulation of LiFePO4 Cathode via Functional Interface Engineering First Author: Rui Tang Corresponding Authors: Jinyang Dong*, Yuefeng Su*, Lai Chen* Affiliations:…
Authors: Haoyu Wang (First Author), Jinyang Dong, Yuefeng Su, Lai Chen (Corresponding Authors) Affiliation: Beijing Institute of Technology Equipment Used: IEST PRCD3100 Powder Resistivity & Compaction Density Tester, SPFT-2000…
1. Preface This paper focuses on quantifying the extent of pressure damage to the material by using different pressures to flat-press silicon-based anode materials powders after calendering and…
1. Research Background In lithium-ion batteries, the anode material, as the main part of lithium ion diffusion and electron transport, determines the performance of the battery to a…
1. Preface The performance of lithium-ion batteries depends fundamentally on the quality of their electrodes. LiCoO2 (LCO) remains the dominant cathode material for 3C (Computer, Communication, and Consumer) electronic applications,…
Abstract Powder compaction density (also referred to as press density in some testing standards) is the bulk density of a battery electrode powder compact after applying a defined…
1. Preface The actual electrode process design, the active material, especially the cathode electrode material conductivity properties is relatively poor, the electronic transmission path is mainly realized through…
First Author: Fang Youyou Corresponding Author: Su Yuefeng, Dong Jinyang, Chen Lai Publishing Unit: Beijing Institute of Technology, Beijing Institute of Technology Innovation Center Equipment Used: IEST Powder…
Abstract The powder compaction process of lithium cobalt oxide (LCO) — the densification behavior of cathode powder under uniaxial compression — determines final electrode density, spring-back, and calendaring…
Abstract Powder material compaction density for battery electrode materials is defined as the mass of powder after compression divided by the compressed volume. It differs from true density…
Abstract LMFP material (lithium manganese iron phosphate, LiMnxFe1−xPO₄) is an olivine-structured cathode material that bridges the gap between LFP and NCM: it shares LFP’s structural stability and safety…
Please fill out the form below and we will contact you asap!
