1. Introduction Gas generation is an unavoidable phenomenon during the battery manufacturing process and its usage, occurring in various stages such as formation, cycling, overcharging, over-discharging, and storage.…
In this paper, an IEST in-situ volume monitor (GVM) is used to carry out in-situ overcharge volume test under different charging rate conditions (0.5C) on lithium cobalt oxide/graphite…
1. Abstract Nickel-rich Lithium Nickel Cobalt Manganese Oxide (NCM Material) is a leading cathode choice for power batteries due to its high energy density. The Ni/Co/Mn ratio critically…
Abstract This study uses an in-situ gassing volume monitor(GVM2200) to analyze the volume changes of two different electrolyte systems in NCM811 ternary cathode cells during high-temperature cycling, providing a…
Abstract Pouch cell swelling refers to the reversible and irreversible dimensional changes—in volume and thickness—that occur during lithium-ion intercalation and de-intercalation. Reversible swelling arises from lattice expansion during…
Abstract In-situ gas evolution testing of lithium-ion pouch cells measures real-time volume change during formation and initial charging using the Archimedes principle of buoyancy, allowing researchers to distinguish how…
Gas evolution during overcharge in lithium-ion cells is driven by two coupled mechanisms: cathode lattice oxygen release (which intensifies with cathode structural instability at high potential) and electrolyte/additive…
Abstract Volume expansion during rest directly reflects internal polarization and lithium concentration gradients built up during charge or discharge — cells resting after a low-rate cycle show minimal…
1. Preface When lithium-ion battery is overcharged, too many lithium ions take out out of the cathode material, and the voltage and temperature of the battery rise rapidly,…
Abstract Battery gas analysis for lithium iron phosphate (LFP) cells quantifies the gas species and volumes produced during abnormal operation such as overcharge and overdischarge. LFP stands for…
Abstract Silicon-based anodes face five principal barriers to commercialization: volume expansion reaching 300% during full lithiation, gas evolution during slurry processing, electrical conductivity approximately 108 times lower than…
Abstract Battery failure analysis is the systematic process of identifying and characterizing the root causes of performance degradation and safety incidents in lithium-ion cells. Two categories are distinguished: performance failure—including…
Please fill out the form below and we will contact you asap!