Abstract Sodium-ion battery testing requires characterization at four levels: particle, powder, electrode, and cell. Limitations introduced at each level can ultimately affect cell performance and reliability. At the…
1. What Is Electrode Characterization and Why Does It Matter? Electrode characterization in lithium-ion batteries refers to the systematic, quantitative evaluation of an electrode sheet’s electrical conductivity distribution,…
1. The Challenge: Managing Volume Expansion in High-Energy Anodes In the race for higher energy density, silicon based anode materials are unparalleled due to their significantly higher theoretical capacity compared…
1. Preface In this paper, IEST has tested the expansion behavior of sulfide solid-state battery during charging and discharging by using a Solid Electrolyte Test System(SEMS) and a In-Situ…
1. Research Background The current lithium-ion batteries have increasing range requirements, and it is crucial to develop anode materials with high specific capacity and high cycle stability. Silicon…
Abstract “M”-type swelling is a non-monotonic thickness change observed in high-nickel NCM cathode materials, in which the electrode expands through most of charging but reversibly contracts near the…
Abstract Silicon anode swelling percentage varies widely by material and modification strategy. In this study, three commercial silicon-carbon (Si/C) anode materials with matched capacity (~5.9 mAh) showed swelling…
Abstract Lithium plating on graphite anodes during fast charging or low-temperature operation presents a major safety and lifetime risk for lithium-ion batteries. This study integrates in-situ dynamic electrochemical…
Abstract A model coin cell is a test-format battery cell designed to closely reproduce the coin cell voltage curve, coulombic efficiency, and thickness expansion behavior of finished cells, while…
Abstract Silicon-based anodes face five principal barriers to commercialization: volume expansion reaching 300% during full lithiation, gas evolution during slurry processing, electrical conductivity approximately 108 times lower than…
Abstract Graphite anode volume expansion during lithiation in lithium-ion batteries is typically 10–15% by thickness, while silicon-based anodes can undergo up to 300% volume expansion at full lithiation. Cathode materials expand in the opposite direction…
Abstract A silicon anode binder with dynamic, reversible cross-links can directly address the structural failure mode that limits silicon anodes: repeated particle fracture from ~300% volume expansion during lithiation. Researchers…
Please fill out the form below and we will contact you asap!